Mbt-lighting LEDWPAR64PRO Manual do Utilizador descarregar pdf (Página 3)

1 2 3 4 5 6 7 8 9 10 OFF ON

Dipswitch instruction

As above figure of dipswitch showed, 1 is “on”and other is “OFF”. “#1”～“#10”stand

for “dipswitch1” ～“dipswitch10”. “1”means “on”and “0”means “off”and “*”means “on”or

“off” is ok( there is no function for dipswitch). X means it can set to 1 or 0 according to

designing needs.

Brief function chart

Mode

#10

Description

DMX

Set DMX address

Enter DMX mode

Strobe

Auto

Gradation

Manual

“S1”select speed of

strobe

“C”select color

brightness

Sound

“M=0”mode 1

“M=1”mode 2

NOTE！Important

1. Sound:

①no FADE；②run to sound；

2. Connect DMX controller with the fixture through 3-pin XLR signal cord。

3. In master/slave mode, one of them was set to Auto mode or sound mode and others

was set to submachine, so fixtures can run at same time.

4. DMX address settings :

On Off

1 2 3 4 5 6 7 8 9

Switch #1 =0;Switch #2 =2;Switch #3 =4;Switch #4 = 0; Switch #5 =0;Switch #6 = 0;Switch

#7 = 0;Switch #8 = 0; Switch #9 = 0;so value for address:0+2+4+0+0+0+0+0+0 = 6, so

address is 6.

128

256

1 2 3 4 5 6

Sem comentários

Mbt-lighting LEDWPAR64PRO Manual do Utilizador Página 3