Mbt-lighting CA1612 Manual do Utilizador descarregar pdf (Página 6)

8.)Then press a Button 1~8 to store the scene.All LEDs blink 3 times.Scene

The LCD will display the bank and scene where your scene was stored.

9.)Repeat steps 2~8 to recordy our desired scenes.

You can copy the settings from one scanner button to another in case you

want to add more fixtures to your show.Just press and hold the scanner

button you want to copy,then press the scanner button you want to copy to.

10.)To exit programming mode press and hold the button for 3Program

seconds.

(When you exit programming,the Blackout LED is on, press Blackout

button to de-function blackout.)

Scene Editing

This function allows you to make changes in aprevious program med scene .

1.)Press the button for three seconds to enter program mode.Program

2.)Use the Up and Down button to select the bank that stores theBank

scene you wish to edit.

3.)Select the scene you want to edit by pressing its button.Scene

4.)Use the faders to make your desired adjustments.

5.)Press the button then followed by the button thatMIDI/Add Scene

corresponds to the scene you editing to store it tomemory.Note:You

must select the same scene you selected earlier otherwise you may

accidentally record over an existing scene.

Scene Copy

This allows you to copy the setting so fone scene to another.

1.)Press the button for three seconds to enter program mode.Program

2.)Use the Bank Up and Down to locate the bank that stores theButton

Scene to copy.

3.)Select desired Scene you want to copy by pressing the button.Scene

4.)Use the buttons Up and Down to select the bank where you wantBank

To store the copied scene.

5.)Press followed by the Button where you want to copy to.MIDI/Add Scene

Delete Scene

This function will reset all DMX channels in corporated with a scene to 0.

1.)Select the desired scene to delete.

2.)While pressing and holding Auto/Del,press the Scene button(1to8)

you want to delete.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Mbt-lighting CA1612 Manual do Utilizador Página 6