Mbt-lighting CA1612 Manual do Utilizador descarregar pdf (Página 7)

Erase All Scenes

This will erase all scenes in all banks.All scenes are reset to 0.

1.)Press and hold dow n and Down buttons while turningProgram Bank

power off.

2.)Re-connect the power,all scenes should be erased!

Copy Bank

Thisfunction enables you to copy the settings of one bank to another bank.

1.)Press and hold th e Button for three seconds to activate theProgram

programming mode.

2.)Select the bank you want to copy.

C.)Press an d release the button.MIDI/Add

D.)Select the bank into which you want to copy to.

F.)press the button. The LCD display will flash shortlyMusic/Bank-Copy

to indicate the copy has been finished.

Delete A Bank

1.)Press and hold th e Button for three seconds to activate the Program

programming mode.

2.)Select the bank to be deleted.Press the andAuto/Del Music/Bank-

Copy at the same time to delete the Bank.The LCD will flash to indicate

the function completion.

You have to program scenes before you can program chases.

1.)Press and hold the Button for 3seconds to enter programmingProgram

Mode.

2.)Choose any chase(1~6)to be programmed.

3.)Select the desired Scene from any bank.Scenes are run in the order

That they are programmed into the chase.

4.)Press the button,all the LED will flash 3 times.MIDI/Add

5.)Repeat steps 3 and 4 as many as you want.You can record up to 240

Scenes into one chase.

6.)Press and hold the program Button for 3 seconds to exit programming

Mode.

Chase Programming

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Mbt-lighting CA1612 Manual do Utilizador Página 7